2008 Medicamat Neograft Punch Hair Matic Automated Hair Restoration System - Rock Bottom Lasers

Shop by Category

Laser Research

2008 Medicamat Neograft Punch Hair Matic Automated Hair Restoration System

Product Question
Email Product

2008 Medicamat Neograft Punch Hair Matic Automated Hair Restoration System; Excellent Cosmetic and Operating Condition, Single Dr Owner, Only Used for 15 Treatments; Includes: (2) Double Footpedals, (1) Flask (0,5L) with Connectics (autoclavable), (2) Autoclavable Implanting Head-pieces with Head & Piston of each diameter (0.8mm, 1.00mm, 1.25mm and 1.5mm), (2) Harvesting Contre Angle autoclavable (0 to 1100 t/mn), (2) Punches of each diameter (0.8mm, 1.00mm, 1.25mm and 1.40mm), (2) Autoclavable Grafts Collectors, (1) Disposable Tubing, (1) Operator Manual, Power Cord, and 90 Day Warranty

$24,975.00

Out of stock

Type:Hair Restoration
Size:L 36 cm x P 45 cm x H 120 cm
Net weight:36 Kg
Voltage:100V – 115V – 230V
Frequency:50 – 60 Hz
Minimum admissible vacuum:650 mbar
Minimum admissible pressure:3 bars
Practice vacuum (suction):maximum
Practice implantation pressure:0.5 to 1,5 bar
Maximum consumption:150 watts
Equip.fuses:2 x size 5×20 (IEC 127 III)
Rating:T 6,3 A – 250 V
Rating:T 10 A – 115 V
Continuous use:yes
Standard Accessories:
Footpedals:2 double footpedals
Flask:1 flask (0,5L) with connectics (autoclavable)
Power Cord:1 power cord
Headpieces:2 autoclavable implanting head-pieces with head & piston of each diameter (0.8mm, 1.00mm, 1.25mm and 1.5mm)
Harvesting:2 harvesting contre angle autoclavable (0 to 1100 t/mn)
Driver:1 motorized driver for harvesting, 2 punches of each diameter (0.8mm, 1.00mm, 1.25mm and 1.40mm)
Collectors:2 autoclavable grafts’ collectors
Manual:User’s instruction manual

WORLD LEADER IN AUTOMATED HAIR TRANSPLANTATION

The patented innovation of the PUNCH HAIR MATIC® medical device in the automation of
F.U.E.* or more precisely, the Trans F.E.R.® **hair transplantation technique, is based on the ingenuity of its two types of manual handpieces:

Contra-angle handpiece for harvesting grafts, used with the F.U.E. technique
rotating punch (0.8, 1, 1.25, 1.4 mm)
* adjustable rotation speed
* clear cutting of the graft
* harvesting of grafts by aspiration,
which is very rapid, precise and trauma-free
* storage of the grafts in the handpiece shaft
* possibility of preparing the receiving area
by micro-punch, with the same motor

Handpieces for implanting the grafts regardless of the technique used: F.U.T. or F.U.E.
selection of the grafts by aspiration and implantation by pressure from the handpiece piston
* high implantation precision (adjustable instrument parameters)
* very rapid implantation without the “popping” effect
* no trauma to the grafts
* possibility of two operators implanting at the same time (two handpieces)

Hair loss in men and women is a real, worldwide problem affecting up to 70% of the men in the most industrialized
countries, 40% of them destined to gradually become bald. Women are not spared, since 40% of them undergo diffuse hair
loss for the same reasons as men. The various drug treatments introduced in the last few decades
produce very commendable results but remain restrictive and costly.

Hopes for results in genetic and stem-cell research are very real, but we will certainly still have to wait for the fruits of several
decades of research before hoping to benefit from these future treatments.
The very real cult of youth fuels a growing expectation in terms of a solution for preserving a full head of hair as long as
possible; the follicular micro-graft is thus obviously the only treatment capable of bringing a solution that is reliable, rapid
and permanent.

The F.U.E. technique is the most recent of the follicular hair
grafting techniques. It has more and more enthusiasts among practitioners, as well
as among candidates for follicular hair grafting: in reality, it is a much less surgical technique than that of strips and is the only
one that can be performed in a doctor’s office under simple local anesthesia. Its use avoids scarring, and the surgical sequelae
are minimal. F.U.E. is especially adapted to the beginning stages of male baldness and to diffuse female hair loss, and may be the
subject of several successive sessions. It can also be used for mega-sessions of more than 2,000 follicular units.
However, performed in a traditional way, it is often criticized because of the length of the operation compared to the strip
technique and because it involves several highly trained operating assistants.

The F.U.E. or Trans F.E.R.® automated technique and the automation of the F.U.E. or Trans F.E.R.® technique
with the PUNCH HAIR MATIC® medical device removes the major obstacle of operating time and number of operations,
due to its two types of patented handpieces developed by the MEDICAMAT company, which are now used by the top
international grafters.

By using the handpieces of the PUNCH HAIR MATIC®
medical device, the time required to perform the harvesting and implantation of the grafts is decreased by at least half
compared to the traditional technique. Adjustment by the practitioner of the various parameters of
the instrument optimizes the coordination and precision of the various movements during the phases of harvesting and
implanting the grafts. The quality of the grafts is both excellent and consistent during
the entire harvesting phase. The grafts are rapidly harvested, stored and sorted, and each of them is then implanted precisely
and without trauma, which contributes to significantly increasing the final aesthetic outcome. The instrument is equipped with
two implanting handpieces that allow two operators to work at the same time.
Automation of the F.U.E. or Trans F.E.R.® technique with the

PUNCH HAIR MATIC® device makes it possible to conduct sessions of 600 to 800 grafts (1,500 to 2,000 hairs) in two
hours with two people (practitioner and assistant), or even sessions of over 1,500 grafts (3,000 hairs) in three hours,
while improving the comfort of the practitioner and the patient.

Date Sold

* Shipping is included in the Continental USA only. Any shipment outside the lower 48 United States will be shipped at an extra cost. If you live outside this area, please contact us for a free shipping estimate.

Related Products

Join Our Mailing List

Subscribe to our email list to receive updates on our latest equipment listings.