2006 Alma Soprano - Very Low Use - Rock Bottom Lasers

Shop by Category

Laser Research

2006 Alma Soprano – Very Low Use

Product Question
Email Product

2006 Alma Soprano Diode Laser Hair Removal; Excellent Operating and Good Cosmetic Condition, Single Owner; Manufactured: 06/2006; Software Version: 3.12; Original Total Pulse Count = 18,024; Dotor used this as a back-up laser so the pulses are ORIGINAL!! Includes: SHR 810nm Diode Handpiece, with Sapphire Dual Chill Tip and 12×10 mm Spot Size, Key, Footswitch, Operator Manual, Operator Eyewear, Interlock, Water Refill Kit, and 90 Day Warranty.km


Out of stock

Laser Type:Continuous Wave GaA1As diode laser array
Wavelength:810 ± 10 nm
Fluence:Up to 120 J/cm2
Pulse Modes:Six modes, scaled I – VI
Pulse Repetition Rate:0.5 – 3.0 Hz
Spot Size:12 x 10 mm
Output Stability:± 10%
System Control:Fully computerized, microprocessor based, Graphic User Interface, LCD touch-screen
Physical Dimensions:14″ wide x 16″ deep x 43.3″ high
Weight:110 lbs
Power Supply US:120VAC, 9A, 50-60 Hz, single phase, 230VAC, 4.5A, 50-60 Hz, single phase
Circuit Breaker:120VAC, 10A, 50-60 Hz, 230VAC, 6A, 50-60 Hz
Skin Cooling:Thermo-electrical, 4ºC (39ºF), Continuous, contact tissue cooling
Laser Classification:Class 4

Diode Hair Removal

The Alma Soprano has six operating modes (pulse types): I – VI. The difference between the modes is in the pulse width and the Blend Mode ratio.
Type I: the most aggressive mode with the shortest pulse width and maximum peak power. It is used for light skin, as well as for fine hair where maximum peak power is required.
Type VI: the longest pulse length and the minimum peak power. It is used for very dark skins and very thick hair.
The peak power decreases from mode I to mode IV, and the blend mode ratio increases following the same pattern. The pulse length is set automatically once the fluence is chosen.

Date Sold

* Shipping is included in the Continental USA only. Any shipment outside the lower 48 United States will be shipped at an extra cost. If you live outside this area, please contact us for a free shipping estimate.

Related Products

Join Our Mailing List

Subscribe to our email list to receive updates on our latest equipment listings.