2012 Zeltiq Coolsculpting w/ CoolAdvantage, CoolAdvantage Plus, & CoolMini Applicators - Free Shipping & Warranty (km/mej) - Rock Bottom Lasers

Shop by Category

Laser Research

Sale!

2012 Zeltiq Coolsculpting w/ CoolAdvantage, CoolAdvantage Plus, & CoolMini Applicators - Free Shipping & Warranty (km/mej)

Product Question
Email Product

2012 Zeltiq Coolsculpting Body Sculpting with CoolAdvantage, CoolAdvantage Plus, & CoolMini Applicators;

Excellent Cosmetic & Operating Condition; Will Receive Software Update, Full Maintenance and Certification Before Shipping; Reason for Selling: Downsizing;

Also Includes: Applicator Adapter, Operator Manual, Additional Accessories, 90 Day Warranty & Free Shipping within the Continental USA & Canada. (km/mej3-3)

This Equipment is Fully Functional, Ready for Use, and Ready to Ship.

Financing Available. All Major Credit Cards are Accepted within the U.S.A. & Canada.

$9,975.00

Out of stock

 

Coolsculpting CONSUMABLES AND RECERTIFICATION

Consumable Required: CoolCard

  • Can Consumables be purchased from an outside source? YES.  Once you purchase a Coolsculpting from Rock Bottom Lasers, we will provide you with the Coolcard distributor information.
  • Does the price per cycle include the gel pads and all of the other supplies that are needed. Yes, all of the other consumables required are included when you order the cards/cycles.

Cost Per Coolcard = $150 per cycle

Each treatment area typically requires 2 cycles.

  • Does the manufacturer Zeltiq charge the new owner a ONE TIME equipment RECERTIFICATION FEE for the purchase of consumables and service? Yes, however, we do not recommend that you pay for recertification.  Coolcards and service can be obtained through outside sources.
  • Zeltiq Recertification Fee Cost: @$35,000
  • Can Consumables be purchased from an outside source? Yes.  Once you purchase a Coolsculpting from Rock Bottom Lasers, we will provide you with the Coolcard distributor information.
  • Can service be obtained from an outside source? Yes. Rock Bottom Lasers can refer a technician to you for service.

Information updated 01/20/2022

Coolsculpting PRODUCT SPECIFICATIONS

Equipment Class:1

Single Phase AC

Continuous Operation: Yes

Voltage: 100VAC, 110-120VAC, 220-240VAC

Frequency: 50-60 Hz

Current: 12A & 7A

Weight & Dimensions:

Control Unit: 215 lbs, 47.5 H x 35 D x 24″ W

Support Arm: 1 lbs, 14.5″ H

Upper Module: 65 lbs, 17 H x 27.25 D x 21.25″ W

Base Module: 150 lbs, 30.5 H x 28.5 D x 24″ W

Coolsculpting MANUFACTURER NOTES

Say Goodbye to Stubborn Fat.

It’s called stubborn fat for a reason: no matter how much you eat healthy and exercise, it’s virtually impossible to lose those annoying muffin tops, love handles, and belly pooch. You’re left with two options: live with them or think surgery. Neither is cool by us. That’s exactly why we developed CoolSculpting. Only CoolSculpting targets fat cells alone, eliminating them in an easy, non-intrusive fashion that exercise and diet can’t achieve as quickly or as effectively.

The Cool Solution is the More Natural Solution.

Procedures that use laser, sonic waves and even surgery to remove fat can actually destroy other tissue in the process by burning, shattering or extracting non-fat cells. This requires downtime for your body to heal. Totally uncool. Fortunately, CoolSculpting doesn’t burn, shatter or extract any cells. Developed by Harvard scientists, our unique, FDA-cleared, patented procedure uses a targeted cooling process that kills the fat cells underneath the skin, literally freezing them to the point of elimination. Only fat cells are frozen. Your healthy skin cells remain, well, healthy. No knives. No suction hoses. No needles. No scars. Once crystallized, the fat cells die and are naturally eliminated from your body. In a few months, boom: say hello to a new you.

Minimal Downtime and Lasting Results

Unlike a lot of other procedures, CoolSculpting takes very little time and is pretty simple to fit into your daily life. After your CoolSculpting treatment, you can typically get right back to your busy day. Each treatment lasts one hour – the same time you might spend at the gym. So you can easily fit your appointment into a lunch break.

After one visit, you’ll typically see a noticeable reduction of fat. It takes a few months to fully realize the effects, mainly because it takes that long for your body to naturally dispose of the fat cells. And yes, you can lose even more with additional appointments if you and your doctor deem it necessary.

So after a few months, your clothes will fit better and you will look better. What’s more, there are no pills or supplements. And as long as you maintain your normal diet and exercise, your long-term results should remain stable. Hello, you again. How cool is that?

The Science Behind CoolSculpting

The CoolSculpting Procedure developed by ZELTIQ is based on sound science called Cryolipolysis. Cryolipolysis is the result of a groundbreaking discovery by Drs. Dieter Manstein and R. Rox Anderson at the Wellman Center for Photomedicine at Massachusetts General Hospital in Boston, a teaching affiliate of Harvard Medical School. ZELTIQ is the exclusive licensee of this patented technology and therefore the only company to provide Cryolipolysis.

Their initial work, first published in the peer-reviewed professional journal Lasers in Surgery and Medicine, proved that subcutaneous fat cells are naturally more vulnerable to the effects of cold than other surrounding tissue. These studies and other clinical research from centers of excellence confirmed that fat cells, when exposed to precisely controlled cooling for a sustained period of time, undergo a gradual reduction and cell death through a process called “induced apoptosis.”

3rd Generation Coolsculpting Applicators:

30 Minute Treatment Time, as opposed to 60 minute for 1st & 2nd Generation Applicators

CoolAdvantage – general body

CoolAdvantage Petite – upper arms

CoolAdvantage Plus – larger general body

CoolMini – treatment for the neck to eliminate double chin

CoolSmooth ‘Pro’ – treatment for the thighs to form & shape the thighs

2nd Generation Coolsculpting Applicators

60 Minute Treatment Time

CoolMax – treatment for larger general body

CoolMini – treatment for the neck to eliminate double chin

CoolFit – treatment for the upper arms

CoolCore – treatment for abdomen

CoolCurve Plus –  treatment for curves, as in the flank area (“love handles” or “muffin top”)

CoolSmooth – treatment for the thighs to form & shape the thighs

* Shipping is included for the lower 48 United States & Canada only. Any shipment outside the lower 48 United States or Canada will be shipped at an extra cost. If you live outside this area, please contact us for a free shipping estimate.

Related Products

Join Our Mailing List

Subscribe to our email list to receive updates on our latest equipment listings.