RECERTIFICATION & CONSUMABLES

FRACTORA CONSUMABLES: Microneedling Tips –  24 Pin, 24 Pin Coated, or 60 Pin Microneedles: $120 per Tip, or a box of the (5) Resurfacing tips is $275 – each tip can be used on the same patient for about 5-8 treatments.

Morpheus8 CONSUMABLES: Microneedling Tips – Prime 12 pin = $75 per Tip, Single Use; Resurfacing 24 pin = $75 per Tip, Single Use; Morpheus8 24 pin = $75 per Tip, Single Use

InMode PRODUCT SPECIFICATIONS

Lumecca SR515 Handpiece

Light Source: IPL – Intense Pulse Light

Spot size: 10x30mm

Pulse Repetition: 1pps at all energies

Wavelength: 515-1200nm

Fluence: 10-30J/cm2

Peak Power: High Peak Power

Pulse Duration: Short/Long

Cooling: Controlled

Lumecca SR580 Handpiece

Light Source: IPL – Intense Pulse Light

Spot size: 10x30mm

Pulse Repetition: 1pps at all energies

Wavelength: 580-1200nm

Fluence: 10-30J/cm2

Peak Power: High Peak Power

Pulse Duration: Short/Long

Cooling: Controlled

Forma Handpiece

RF Output Frequency: Up to 65 W

Output Frequency: 1 MHz

Temperature Cut-Off: Real time temperature measurements set by operator up to 43°C

Fractora Handpiece

24 Pin: Type – Full Thickness Dermal; Configuration – 6×4; Pin Length – 3000u; Ablation Depth – 3 mm; Heating Depth – Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps

24 Pin Coated: Type – Deep and Subdermal; Configuration – 6 x 4 Coated; Pin Length – 3000 u, Ablation Depth – 3 plus mm; Heating Depth – Between 3-5 mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps

60 Pin: Type – Mid Dermal; Configuration – 10×6; Pin Length – 600u; Ablation Depth – 0.6-1 mm; Heating Depth – Between 3-5mm; Max Output Energy 62 mj/pin; Output Frequency – 1 MHz; Repetition Rate – Up to 2 pps

Fractora Tip Cost: A box of the (5) Resurfacing tips is $275 – each tip can be used on the same patient for about 5-8 treatments.

DiolazeXL Handpiece

Light Source: Diode – Continuous Wave

Laser Wavelength: 810 nm (Diode)

Spot Size: 12mm x 26 mm

Fluence: Up to 40 J/cm2

Pulse Duration: Short/Long

Light Cooling Guide: 2-15°C

Repetition Rate: Single and Auto-Repeat

Vasculaze Handpiece

Laser Wavelength: 1064 nm (diode)

Spot Size: 3mm x 4mm

Fluence: 40-300 J/cm2

Pulse Duration: 5-100 msec

Light Cooling Guide: 7-12° C

VLaze Handpiece

Laser Wavelength: 1064 nm (yag)

Spot Size: 4 mm x 5 mm

Fluence: Up to 300 J/cm2

Pulse Duration: 5 ms  25 ms

Morpheus8 Handpiece

Type: Deep and Subdermal Radio Frequency Microneedling

Pin Length: 4000

Ablation Depth: 5mm +

Max Energy: 62 mJ/pin at 75 W

Frequency: 1 MHz

Repetition Rate: Up to 2 pps

Tips Available:

• 12 pin Prime Mopheus8 for small narrow areas such as the periorbital zone and upper lip
• 24 pin Morpheus8 for larger facial areas such as the forehead, nasolabial folds, jawlines, and neck, as well as the body for skin tightening and wrinkle reduction
• 24 pin Resurfacing Morpheus8 for the treatment of superficial conditions, including scarring

BodyFX Handpiece

Laser Type: Radio Frequency

Vacuum: 300 – 50 mBar

RF Output Frequency: Up to 50 W

Output Frequency: 1 MHz

Temperature Cut-Off: Real time temperature monitoring and cut off operator selectable up to 43 degrees C

Plus (or Forma Plus) Handpiece

Laser Type: Radio Frequency

RF Output Frequency: Up to 65 W

Output Frequency: 1 MHz

Temperature Cut-Off: Real time temperature measurements set by operator up to 43 degrees C

InMode MANUFACTURER NOTES

A FULL BEAUTY SUITE

Optimas will help you optimize results for your patients and your business

Professional grade aesthetic procedures – Optimas is a great suite of innovations in one workstation to help you achieve your goals. The Optimas full beauty suite has state-of-the-art light, laser, and radiofrequency devices for skin care and hair removal.

LUMECCA SR515 & SR580 Handpieces

Fastest IPL Results – Clearance in 1-2 sessions, compared to 4-5 sessions with competing devices

Lumecca is a breakthrough intense pulsed light (IPL) that delivers up to 3X more energy in the 500-600 nm range to improve efficacy for vascular and pigmented lesions. It is optimized for clinicians to treat a variety of skin types and conditions with just a single session.

SR515 – Removal of Pigmented Lesions on Light Skin, Removal of Superficial Vascular Lesions

SR580 – Removal of Pigmented Lesions on DARK SkiN, Removal of DEEP Vascular Lesions, Removal of Vascular Lesions on DARK Skin

FORMA Handpiece

Face Remodeling.

Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results

Forma is the first auto-adjusting, non-invasive, thermal skin treatment for deep and uniform tissue stimulation. Forma uses radio-frequency power that flows uniformly between the electrodes to provide a comfortable thermal experience with immediate and subsequent contraction. There is no downtime in this effective lunch-time procedure that will make anyone look years younger!

Forma has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.

Control: Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.

Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently.

FRACTORA Handpiece

Radio Frequency MicroNeedling.

Fractora is a fractional skin resurfacing and subdermal tissue coagulation device that bridges the gap between fractional lasers and surgical procedures. Clinical papers demonstrate outcomes such as: improvement in skin complexion, reduction in skin irregularities and restoring skin to a more youthful appearance. This all occurs within one session or multiple sessions, depending on patient preference. Fractora can be used on active cystic acne and acne scars.

• Addresses multiple problems, including treatment of wrinkles with fractional coagulation and ablation.
• Significant resolution of cystic acne and scars (improving acne scarring by 50%).
• Safe on skin type VI with little risk of post inflammatory hyperpigmentation (PIH) which is common with other resurfacing methods.
• Combination of fractional coagulation and volumetric heating through tips with various depths and pin density configurations.
• High efficiency of vascular and pigmented lesions due to high peak power and optimized output.
• Complete photo rejuvenation in 1 or 2 treatments versus 4-6 treatments with standard IPLs.
• Reduces treatment time thanks to large spot size and high pulse repetition rate.
• Strong sapphire cooling tip results in painless procedure.
• Fast pulse repetition rate at all settings. Highest peak power 3300W*

DIOLAZEXL Handpiece

Diode Hair Removal.

Gold Standard Diode Hair Removal Without Compromising Peak Power, Speed and Large Spot Size

DiolazeXL is the most effective at combining high peak power and a large spot size simultaneously in the same session. Clinicians can benefit from this first and only combination of speed, efficacy, safety and comfort to optimize their hair removal revenue.

• Gold standard wavelength, pulsing and power for optimal results and maximal safety.
• Reduction in clinician treatment time – Powerful enough to target and treat even the most stubborn hair.
• Virtually painless due to strong built in cooling.
• Can treat up to skin type VI.

VASCULAZE Handpiece

Vascular Lesion Removal.

Get the ultimate in vascular resolution with a fast and chilled leg and facial vein treatment

Vascular lesions (including angiomas, telangiectasias, port wine stains and leg veins) can be treated with the Vasculaze. The Vasculaze is optimized with high peak power that targets appropriate hemoglobin, so patients can benefit from a fast and safe treatment.

Narrow and ergonomic spot size is optimized for vascular lesion treatment. High peak power. Strong contact cooling. No disposables and consumables.

VLAZE Handpiece

Vascular Lesion Removal.

Fast, powerful and ergonomic laser device. Treats vascular lesions such as veins, spider veins and port wine stains safely, comfortably and effectively on all skin types from very light to darker skin tones.

MORPHEUS8 Handpiece

THE FIRST FULL BODY FRACTIONATED TECHNOLOGY

Fractional Remodeling and Contouring At Its Best

The Morpheus8 is a new subdermal adipose remodeling device (SARD) that fractionally remodels and contours the face and body. Penetrating deep into the skin and fat, this morphs the aging face of body into a more desired smooth and sleek appearance, for all skin tones.

• Deep and safe fractional treatment penetrating 4000 microns with an additional thermal profile of 1000+ microns
• Extremely uniform effect
• Little to no thermal damage to dermis
• Safe on skin type VI with little risk of post inflammatory hyperpigmentation (PIH) which is common with other resurfacing methods.

BODYFX Handpiece

The first and only non-invasive body contouring technology proven in peer-reviewed and published human studies to both permanently kill adipose tissue and contract the skin.

BodyFX is the first and only non-invasive body contouring and cellulite technology proven in peer reviewed and published human studies to both permanently kill adipose tissue and contract the skin. BodyFX addresses problematic fatty tissue in larger body areas such as the abdomen, back (flanks), and thighs. BodyFX works by using different clinically proven modalities including radio-frequency energy and negative pressure applied to the skin and underlying fat.

• Pre-heating of tissue reduces threshold for selective apoptosis of fat cells.
• Sophisticated tissue temperature and impedance monitoring achieves and maintains optimal temperature end points to prevent atrophic damage.
• Active temperature monitoring and control with cut-offs for unprecedented safety, virtually eliminating risk of thermal injury.

PLUS (or FORMA PLUS) Handpiece

Stimulates the formation of new collagen and improves the skin’s elasticity for long-lasting and remarkable results.

Plus is a non-invasive sub-dermal heating applicator that stimulates sub-cutaneous tissue. Radio-frequency energy flows uniformly between the electrodes to provide a comfortable thermal experience, built-in temperature controls allow for the attainment of clinically proven optimal temperatures without concerns of hot spots or under treatment.

Forma Plus has a temperature sensor built into the hand piece which reads skin surface temperature 1000 times per second, allowing clinicians to acquire skin temperature in real time.

Software algorithm allows unprecedented safety of RF delivery. The cut off temperature” feature reduces RF energy automatically when the hand piece senses that the required skin temperature has been reached.

Clinical evidence suggests prolonged exposure to temperature above 40°C is advantageous for optimal clinical outcomes. Only InMode’s A.C.E. technology allows you to utilize therapeutic temperatures safely and efficiently.