2020 InMode RF Pro For Sale – Overview

This 2020 InMode RF Pro system with Morpheus8 Face & Body handpieces supports RF microneedling, skin tightening, resurfacing, and scar revision. It includes Morpheus8 face and body handpieces, a footswitch, power cord, USB manual, quick reference guide, and handpiece cases.

Warranty & Buyer Confidence

Rock Bottom Lasers stands apart because most aesthetic laser resellers do not include warranty coverage. However, we include a warranty and guarantee this 2020 InMode RF Pro system will function after delivery and proper installation. The warranty covers defects in materials and workmanship, excluding abuse, misuse, or force damage.

Affordable Service Support

In addition, warranty coverage includes parts, labor, shipping, and travel. Rock Bottom Lasers also refers qualified technicians across the USA. As a result, buyers receive access to cost-effective service options for this pre-owned InMode RF Pro system, often significantly lower than manufacturer service pricing.

Availability

This InMode RF Pro system is ready to ship and available for immediate purchase. However, inventory may change quickly, so we recommend contacting us early.

Browse our RF Microneedling inventory here.

Platform General System Information

The information below reflects general manufacturer specifications for InMode RF Pro platforms. Please note that included handpieces and configuration may vary depending on the specific unit.

InMode RF Pro Consumables & Recertification Fee

Does InMode charge a one-time recertification fee for the purchase of consumables?

Yes, however, we do not recommend that you pay for recertification if the current owner is willing to represent it for the purchase of consumables.

Recertification Fee: $50,000; However, if the current owner is representing the system for the purchase of consumables, the buyer will not need to pay a recertification fee.

This recertification fee must be paid only if the current owner is not representing the system, or if you already own one of these devices. Therefore, confirming representation status before purchase is strongly advised.

Handpiece Consumables & Pricing

Prime Tip 12 Pin = $125 per Tip, Single Use, minimum order box or 4 = $500

Resurfacing Tip 24 Pin = $125 per Tip, Single Use, minimum order box or 4 = $500

Standard Tip 24 Pin = $100 per Tip, Single Use, minimum order box or 4 = $400

Body Tip = $155 per Tip, Single Use, minimum order box of 4 = $620

Fractora 24 & 60 Pin = $58–$79 per tip when purchased in 5-packs ($289–$394 per box)

FormaV Disposable Applicator: Approximately $75 each

BodyFX Handpiece = No Consumable Required

MiniFX Handpiece = No Consumable Required

Forma Handpiece = No Consumable Required

Forma Plus Handpiece = No Consumable Required

Plus Handpiece = No Consumable Required

Plus90 Handpiece = No Consumable Required

InMode RF Pro Product Specifications

Manufacturer: InMode Ltd.

Device Type: Radiofrequency (RF) Aesthetic Platform

Technology: Fractional RF and Bipolar RF

Maximum RF Output Power: 65 W

RF Frequency: 1 MHz

Input Voltage: 100–240 VAC

Main Line Frequency: 50–60 Hz

Input Current: 2 A

Dimensions: 36.5 cm (W) × 39.3 cm (D) × 111 cm (H) (14.4 in × 15.5 in × 43.7 in)

Weight: 20 kg (44 lb)

Display: Color Touchscreen User Interface

Control: Footswitch Activation

Power Supply: Integrated AC/DC Power Supply

Cooling: Integrated Temperature and Impedance Feedback Monitoring

Operating Environment: Hospital and Clinical Use

Compatible Applicators:

Morpheus8 (12, 24, 40 Pin), Morpheus8 T, Fractora 24 Pin, Fractora 60 Pin, Forma, Forma Plus, Plus, Plus90, MiniFX &BodyFX,

Needle Penetration Depths:

Fractora 60 Pin: 0.2 mm
Fractora 24 Pin (FRF): 2.5 mm
Morpheus8 12 Pin: 4.0 mm
Morpheus8 24 & 40 Pin: 7.0 mm
Morpheus8 T: 0.5 mm

Maximum Applicator Output:

Morpheus8 12/24/40 Pin: 60 W
Morpheus8 T: 30 W
Fractora 24 & 60 Pin: 60 W
BodyFX: 50 W
WMFace: 65 W
MiniFX: 25 W
Forma, Forma Plus, Plus, Plus90: 50 W
i-Forma: 12 W

Operating Temperature: 15°C to 30°C (59°F to 86°F)

Operating Humidity: 30%–80% Non-Condensing

Storage Temperature: -20°C to 65°C (-4°F to 149°F)

Compliance Standards: IEC 60601-1, IEC 60601-1-2, IEC 60601-2-2

Prescription Device: Yes

FDA Clearance: K210492

Intended Use

The InMode RF Pro is intended for use only by qualified healthcare professionals who have received appropriate training on the system and its compatible applicators.

Pre-Use Inspection

Always inspect the device, handpieces, cables, and accessories before each use. Do not operate the system if any component appears damaged or is not functioning properly.

Approved Accessories

Use only genuine InMode-approved applicators, disposable tips, and accessories. The use of unauthorized components may affect performance and void the manufacturer’s warranty.

Cleaning and Disinfection

Follow all recommended cleaning, disinfection, and maintenance procedures described in the operator’s manual. Disposable components are intended for single-patient use only and must not be reused.

Treatment Safety

Ensure the treatment area is free of flammable materials and that all metal objects are removed from the treatment site before beginning a procedure.

Parameter Verification

Verify that treatment parameters, applicator selection, and needle depth are appropriate for the patient’s anatomy and clinical indication before delivering RF energy.

System Monitoring

The RF Pro system continuously monitors impedance and temperature during treatment to help provide consistent energy delivery and patient safety.

Preventive Maintenance

Routine preventive maintenance and calibration should be performed at the intervals recommended by InMode to maintain optimal performance and regulatory compliance.

Storage and Transportation

Store and transport the device within the specified environmental conditions. Avoid exposure to excessive moisture, dust, vibration, or extreme temperatures.

Operator Manual Reference

Refer to the official InMode Operator Manual and Instructions for Use for complete operating instructions, contraindications, warnings, precautions, and maintenance requirements.

FAQ’s

What treatments can the InMode RF Pro perform?

The InMode RF Pro is a multi-application radiofrequency platform designed for skin tightening, fractional RF microneedling, body contouring, cellulite reduction, tissue remodeling, and facial rejuvenation using compatible handpieces such as Morpheus8, Fractora, Forma, BodyFX, and MiniFX.

Which handpieces are compatible with the InMode RF Pro?

Compatibility depends on the system’s software licenses and included accessories. Common compatible handpieces include Morpheus8 (12, 24, and 40 Pin), Morpheus8 T, Fractora 24 and 60 Pin, Forma, Forma Plus, BodyFX, MiniFX, and Plus applicators.

Does the InMode RF Pro require disposable consumables?

Some applications require disposable consumables. Morpheus8 and Fractora treatments use single-use treatment tips, while applicators such as Forma, Forma Plus, BodyFX, and MiniFX use reusable handpieces and typically require only coupling gel during treatment.

Does the InMode RF Pro require manufacturer recertification after resale?

Manufacturer transfer policies may vary depending on the system’s serial number and ownership status. Buyers seeking direct manufacturer support, service eligibility, or consumable purchasing should confirm current transfer requirements with InMode before completing a purchase.